Our company is representative for Algocraft Device Programmers, Please contact me for device programmers inquiries Writenow programmers and Writebefore programmers. We shipping worldwide !
Main Features
Ultra-fast, universal In-System Programmers
True parallel, program up to 8 devices at once
Industrial-grade reliability
Standalone operations or host controlled
Easy to install and to use
Compact size, fixture friendly
Introduction
Based on the proprietary WriteNow! Technology, the WriteNow! Series
of In-System Programmers is a breakthrough in the programming industry.
The programmers support a large number of devices (microcontrollers,
memories, CPLDs and other programmable devices) from various
manufacturers and have a compact size for easy ATE/fixture integration.
They work in standalone or connected to a host PC (RS-232, LAN and USB
connections are built-in), and are provided with easy-to-use software
utilities.
Features
Supports microcontrollers, serial and parallel memories, CPLDs and other programmable devices
USB, LAN, RS-232 (isolated) and low-level interface (isolated)
ISP I/O relay barrier (only available on the single-site model)
I/O protection
Wide range power supply (12-24V)
Powerful and Easy-to-Use Software Utilities
The WriteNow! Series of In-System Programmers can be controlled by a
host PC through simple, ASCII strings through a standard terminal
interface. On top of that, a powerful user interface is provided which
allows to setup and control the instruments through easy, graphical
procedures. The WriteNow! Project Generator guides you through the
creation and debugging of a programming Project in a few guided steps:
device selection, source file creation, board parameter settings,
programming flow options, upload and run of the Project.
Models
The WriteNow! Series of In-System Programmers is available in four
models, which share a common in-system programming core. Single-site
model features a relay barrier on ISP I/O lines.
WN-PRG01A
Single-Site In-System Programmer
WN-PRG02A
2-Site In-System Programmer
WN-PRG04A
4-Site In-System Programmer
WN-PRG08A
8-Site In-System Programmer
External Relay Barriers
External relay barriers are available as accessories for multiple-site WriteNow! models.
WN-REB04A
Relay Barrier Module for WN-PRG02A and WN-PRG04A
WN-REB08A
Relay Barrier Module for WN-PRG08A
Demultiplexer Modules
WN-DM2X2A
Demultiplexer Module for WN-PRG02A (4 Channels + Relay Barrier)
WN-DM2X3A
Demultiplexer Module for WN-PRG02A (6 Channels + Relay Barrier)
WN-DM2X4A
Demultiplexer Module for WN-PRG02A (8 Channels + Relay Barrier)
WN-DM4X2A
Demultiplexer Module for WN-PRG04A (8 Channels + Relay Barrier)
WN-DM4X3A
Demultiplexer Module for WN-PRG04A (12 Channels + Relay Barrier)
WN-DM4X4A
Demultiplexer Module for WN-PRG04A (16 Channels + Relay Barrier)
WN-DM8X2A
Demultiplexer Module for WN-PRG08A (16 Channels + Relay Barrier)
WN-DM8X3A
Demultiplexer Module for WN-PRG08A (24 Channels + Relay Barrier)
WN-DM8X4A
Demultiplexer Module for WN-PRG08A (32 Channels + Relay Barrier)
Silicon Support
Adesto
Atmel
Cypress
Giga Device
Infineon
Microchip
Micron
Nordic Semiconductor
NXP (Freescale)
Renesas
Sigma Designs
Silicon Labs
Spansion
SST
ST Microelectronics
Texas Instruments
Winbond
New manufacturers and devices are constantly added. Contact us for more information.
The IsatHub service is accessed from your smartphones, iPad , or iPod Touch (tm) or android device through the control app. The Voice app enables you to send and receive calls via IsatHub's with dedicated high quality voice line as well as your text messages, and internet even your device is connected to WiFi only. Works with Android Devices and Apple Devices.
Inmarsat also provide rental bundle for IsatHub included Data and Voice Bundle
Inmarsat IsatHub Rental Bundles
Plan
Included Data
Price
Additional Megabytes
Voice Minutes
SMS
IsatHub 25 MB
25 MB
$199.00
$8.45 each addnl. MB
$1.25 / each
$0.99 / each
IsatHub 50 MB
50 MB
$249.50
$7.99 each addnl. MB
$0.99 / each
$0.99 / each
IsatHub 100 MB
100 MB
$399.00
$6.99 each addnl. MB
$0.99 / each
$0.99 / each
IsatHub 200 MB
200 MB
$738.00
$6.99 each addnl. MB
$0.99 / each
$0.00 / each
IsatHub 500 MB
500 MB
$1,820.00
$5.99 each addnl. MB
$0.99 / each
$0.99 / each
IsatHub 1000 MB
1000 MB
$3,640.00
$4.99 each addnl. MB
$1.25 / each
$0.99 / each
Our sales team is waiting to help you determine if the IsatHub will meet your needs and setup your order in minutes.
Please call 1-941-208-0664
Easy To Use
The IsatHub service is accessed from your iPhone, iPad and/or iPod touch or Android[TM] device through the control app. This provides set-up assistance and gives you full control over access to the service as well as visibility of data usage from each device sharing the IsatHub connection. The voice app enables you to use your smart device to send and receive voice calls via IsatHub’s dedicated high-quality voice line, as well as text messages, even if your device is for WiFi use only.
Grab Your World with You
Imagine a world where you use your phone or tablet seamlessly to talk, text, access the internet and your apps, independently of cellular and fixed networks. Well that world is here with IsatHub, our global smart device connectivity service. So now you can remain productive by having a constant line back to the office and stay in touch with your friends and family wherever you go.
When you TV reception interfere with near FM station or your TV can not pick up several channels.
These common problems solved with the preamplifier installed.
Preamplifier helps pick up channels that your non-amplified antenna alone may not be able to pick up.
Additionally, the preamplifier minimizes pixelization and drop-outs.
What We should look at Preamplifier , before we buy it ?
These common ideal question and answer must applied to the preAmplifier that you choose.
Ask these
1. Does The preamplifier work with any antenna ? The preamplifier that works with any passive/non-amplified antenna is better than the specific one
2. Does Thepreamplifier work with VHF & UHF signals ? Typical gain for VHF is 20 dB (lo) and 15 dB (hi) and for UHF is 18 dB.
3. Does the preamplifier have an FM trap ? Thepreamplifier should have built-in FM trap that attenuates FM signal so that it does not interfere with digital
TV channels.
4. What is the noise figure of the preamplifier ? The preamplifier has a typical noise figure of 1 dB for UHF and 3 dB for VHF.
5. Can I use a splitter with the preamplifier ? The preamplifier can be used to distribute signal to multiple TVs.
Based on the spec I have mention above, I pick it for you 3 the best preamplifier for indoor outdoor antenna that serve in the market.
Can Be Installed Indoor, Outdoor or in Attic Due to its Compact Size and Heavy-Duty Weatherproof Housing
Blocks Interference From 3G, 4G, 5G Smartphones and Transmitters with EMI & FM Out of Band Filtering (Does Not Pass FM Radio Signals to Avoid Over Amplification Issues)
Improves Signal Quality, Decreases Pixilation and May Increase Number of Channels
Button Adjustable Amplification (17 dB/30 dB) with Flexible USB Powering Options
3. RCA Preamplifier for Outdoor Antenna
Switchable FM trap reduces interference from FM frequencies
Preamplifier for outdoor antennas extends range in low signal strength areas
RCA's advanced SmartBoost technology amplifies weak signals to deliver the most channels possible
Another preamplifier for your alternative with almost the same specs are Winegard LNA200S, Channel Master Titan
Winegard(tm) Carryout(tm) Anser Antenna is a portable satellite system that required a user elevation setting to automatically acquire the desired satellite. Winegard Anser Antenna As the user, you will
need to know which satellite you would like to view and the corresponding elevation angle for that satellite. Under
“Compatible Satellites,” different popular satellite options are outlined along with the programming offered via each
satellite. Elevation and coverage maps are also included to help you determine the correct elevation angle and
coverage for certain satellites. The Anser Carryout Antenna for use with Dish Network and Bell TV, and DirectTV.
Parts Of Antenna
Antenna in Deployed Position
Antenna in Stowed Position
Simple step Installation Anser antenna
Find elevation angle -via receiver menu or provided maps*.
Hook up the antenna -manually set the elevation to the correct elevation angle for your area.
Get to the signal meter-screen on your receiver.
Plug in the unit—the unit will search and find the strongest signal.
If the system stops-on a signal but is not on the desired satellite for viewing, the unit will move to the next signal
found in 45 seconds.
Once you have signal on your desired satellite - unplug the power to the unit.
Watch TV!
How To Pointing Antenna ?
The Principle of Pointing an Antenna, you need only two information, The information about the Azimuth and the elevation number that point the antenna to the Satellite that will serve your receiver ? picture courtesy : promaxelectronics.com See the picture describe the Azimuth the position of antenna from the North compass and the Elevation is the corner degree antenna from horizon . Just the simple like that...
*Elevation angles may not be displayed in the receiver menu for satellite 72° (recommended as a single satellite
solution for DISH®
HD programming) or 129°. If the elevation angle is not displayed in the receiver menu, use the
provided elevation and coverage maps to find the elevation angle for your current location.
Compatible Satellites
For Dish Network
Set To :
72°: Eastern satellite, recommended
for HD programming
129°: Western satellite, majority of
HD programming
119°: Majority of std. programming
110°: Some standard programming,
limited HD programming
Elevation Maps
How to use the maps ?
Determine which satellite you want to point at -Maps are provided for Dish 72, Dish 110, Dish 119, Dish 129, DirectTV 101, Bell TV 82, and Bell TV 91.
On the corresponding map-find your location.
Determine the elevation angle-closest to your current location.
Use this elevation angle to help point your antenna-Keep in
mind that the elevation angles provided are approximate.
If
having trouble-locking onto signal with the elevation angle
provided, try adjusting the angle ±2–3 degrees.
Example : Your current location is in Colorado, and satellite is Dish 72 for HD Programming. Find your Elevation ? Answer : So look at Dish 72 Map below , for Colorado elevation is 33, so adjust your elevation to 33 degree from Horizon. I attached a US map to make it easier to find your location and match the elevation map
Here the lists elevation maps Maps For Dish Network
Maps for DirectTV
Maps for Bell TV
TIP
The 72° satellite is recommended as a single satellite solution for
DISH®
HD programming. In the Northwest, the extremely low elevation
angle may present issues in getting clear line-of-sight to the satellite. In those
circumstances, use one of the western satellites (110°, 119°, or 129°). Note
that the 72° and 129° satellites require an HD receiver. circumstances, use one of the western satellites (110°, 119°, or 129°). Note
that the 72° and 129° satellites require an HD receiver.
Here is Video Dish Azimuth and Elevation Pointing for your reference.
