MyAGV Mecanum Wheels Lidar High Precision Camera Car Kit

MyAGV Mecanum Wheels Lidar High Precision Camera Car Kit - MyAGV is a car-shaped robot equipped with a camera with a high level of precision and also equipped with Lidar so that it can be used for location mapping purposes.

In addition, this robot also uses mechanical wheels so that it has high navigational mobility in all directions up to 360 degrees. Besides being able to be used for mapping, MyAGV can be combined with the ARM myCobot Pi robot to produce more complex functional robots, for example, such as moving goods from one point to another by utilizing the camera and Lidar. MyAGV supports Robot Operating System (ROS) simulation and can be programmed in Python and C++ programming languages. In addition, this robot also supports the Raspberry Pi and Arduino platforms. Feature : Omnidirectional Wheel AGV Equipped with Lidar for Navigation and Mapping Needs Built-in High Precision Camera Can be Combined with ARM robot myCobot Pi Specifications: Model : myAGV Charging Voltage : 24V 1A Controller : Raspberry Pi 4B Built-in Camera : 5M Pixels Motor : Hall Encoder Motor Motor RPM : 220 rpm/min Moving Speed ​​: 0.9 m/s Wheel Model : Mekanum Lidar: 360 degree omnidirectional Range : 8m Robot Dimension : 300x205x145 mm

AT89S51 Prototype Board 40 Pin MCS-51 DT-Proto

AT89S51 Prototype Board 40 Pin MCS-51 DT-Proto - 40 Pin MCS-51 DT-PROTO is a proto board based on the AT89S51 microcontroller which has a UART RS232 communication port and supports In-system Programming for

ISP-featured microcontrollers.

This module is equipped with a pad array for additional circuitry, so this module is perfect for experimenting, creating simple single chip applications, or prototyping products. For example: LED display controller, motor driver controller, robot motion controller, data exchange with computer or other modules, digital sensor reader, memory access and PPI. Power supply 9VDC - 12VDC Features Crystal frequency 11.0592 MHz, has a prototype area consisting of 1,018 through-hole pads suitable for DIP components Dimensions 12.1 cm (W) x 10.1 cm (W) x 2.2 cm (H) Microcontroller/microprocessor based AT89S51 Number of I/O ports 32 I/O lines RJ-11 interface port for RS-232 No bootloader ISP programming port Port Equipment : - 1 DT-PROTO 40 Pin MCS-51 board. - 1 set of serial cable.

Arduino Uno R3 rev3 CH340 clone atmega328 - no cable usb

 

Arduino Uno R3 rev3 CH340 clone atmega328 - no cable usb - Arduino uno without a USB cable so that the price is cheaper, you can use a regular printer cable. Arduino uno available in SMD version 
This is the clone version, but don't get me wrong, clone doesn't mean fake
The difference is only in the usb to serial converter using the CH340 to replace the FT232RL
CH340G drivers can be downloaded here:
http://www.arduined.eu/files/CH341SER.zip
Specification
Microcontroller: ATmega328
Operating Voltage: 5V
Input Voltage (recommended): 5-9V
I/O Pins: 14 digital (of which 6 provide PWM output), 6 analog
Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
SRAM: 2 KB (ATmega328)
EEPROM: 1KB (ATmega328)
Clock Speed: 16 MHz
Package:
1pcs Arduino uno clone (WITHOUT CABLE)

signal booster antenna indoor omni antenna repeater mushroom signal 3g 4g - signal booster1

 

## THIS ANTENNA IS INTENDED TO BE USED ON A REPEATER BOOSTER Signal Amplifier Repeater, this antenna CANNOT WORK/STAND ALONE, MUST WITH A REPEATER SIGNAL BOOSTER ##

Product excellence :
1. The indoor signal spreads more evenly in all directions.
2. This antenna is of Grade A++ quality, unlike other antennas with cheap materials and finishing.
Specifications:
- Antenna Type: OMNI INDOOR
- Gain Average : 3dB/5dBi
- Frequency: 800Mhz / 900Mhz / 1800Mhz / 2100Mhz, 2400Mhz, 2700Mhz. Wideband 800-2700Mhz
- Network Support: 2G, 3G, HSDPA, 4G LTE, 4G DCS
- Frequency Range (MHz): 800~2700MHz
- Polarization Type: Horizontal & Vertical
- Weight: 300gram
- Connector Type: N Female

signal booster variations:
1. Signal booster 9182A
- Uplink output power = 23dBm
- Uplink output gain > 63dB
- Downlink output power = 30dBm
- Down to output gain = 70dB
- Noise factor < 6dB
- Fluctuation Band < 6dB
- VSWR < 1.8
- TOI < -45dBc/3KhZ
- Impedance = 50 Ohms
- Connector = N-type connector
- Size = 112 x 140 x 32
- Coverage = 500m2
- Frequency range = uplink 890-915 Mhz, 1920-1980 Mhz. Downlink 935-960 Mhz, 2110-2170 Mhz

2. GSM ST-980 . signal booster
- Uplink output power = 26dBm
- Uplink output gain > 66dB
- Downlink output power = 33dBm
- Down to output gain = 75dB
- Noise factor < 6dB
- Fluctuation Band < 6dB
- VSWR < 1.8
- TOI < -45dBc/3KhZ
- Impedance = 50 Ohms
- Connector = N-type female connector
- Size = 112 x 140 x 32
- Coverage = 1000m2
- weight = 950gr
- Frequency range = uplink 890-915 Mhz, 935-960 Mhz. Downlink 935-960 Mhz, 2110-2170 Mhz
3. GSM ST-9182B signal booster
- Uplink output power = 23dBm
- Uplink output gain > 63dB
- Downlink output power = 30dBm
- Down to output gain = 70dB
- Noise factor < 6dB
- Fluctuation Band < 6dB
- VSWR < 1.8
- TOI < -45dBc/3Kh
- Impedance = 50 Ohms
- Connector = N-type female connector
- Size = 112 x 140 x 32
- Coverage = 500m2
- weight = 1.950gr
- Frequency range = uplink 890-915 Mhz, 935-960 Mhz. Downlink 935-960

Log Periodic Outdoor Antenna / Periodic Antenna

 

Log Periodic Outdoor Antenna / Periodic Antenna - Log Periodic Antenna is widely used as a singal amplifier outdoor antenna because this type of antenna has a wide frequency limit (multi-frequency).

Unlike ordinary yagi antennas which can only work on a single frequency.

This antenna has a wide frequency (Wide Band) 800 MHz to 2600 Mhz, especially on LTE / 4G, 3G / 2G, and CDMA networks.

But traditional Yagi Antenna if for GSM only GSM In certain areas conditions can improve coverage characteristics and maximize modem connections. This Log Periodic Antenna is designed to be waterproof  with UV protection so it is very suitable for outdoor weather conditions.

Bracket that can be adjusted tilt angle, Mounting / Pipe clamps for poles diameter 3.5cm to 5cm, Installation guide and original modem pigtail 

(according to modem type). Pigtail modem can be replaced, you can buy it separately when you have a modem with another type.

Features:
- Lightweight made of Waterproof and UV Protection
- Ultra Wide-Band Coverage 806 MHz to 2700 MHz
- Antenna length 29 cm
- 8.5/9 dBi real gain

Package Contents:
- Yagi Log Periodic Antenna Unit
- N type connector cable(30 cm)
- 1 piece L bracket
-2 pieces of fixing brackets