Best PIC Microcontrollers In Sytem Programming

PIC In System Programming - PIC microcontrollers, like most modern microcontrollers, can be programmed in system (or in circuit – ICSP) rather than in a socket programmer. 

This has advantages in development and in production, for example, to use different firmware for different versions or to speed up production. 

The major benefit though is field upgrades.PIC microcontrollers are a very useful and versatile tool for use in many electronic projects. They are very inexpensive and easy to find. They are also very powerful and many are capable of speeds up to 64 MIPS using the internal oscillator block, about 16 times faster than most comparable AVR microcontrollers. 
PICs are also easy to program, however getting the project set up can some times be tricky. These instructions will walk through the process of setting up the 
software, creating a new project, and programming some very simple functions to test the configuration and ensure everything is working. They are designed to be 
very open ended; after the project is created and the basics are finished the reader is encouraged to explore all the features and extras not covered in these 
instructions. Also you will find that these instructions will start out walking through step by step, but as the instructions near the end the reader is 
encouraged to explore other ways of accomplishing the tasks and make the project their own.

1. Programmer PIC K150

Support the most popular programming PIC chips, read, encryption and other features.

No external power supply,communication and power is only a USB cable to print complete, without any cable.

PICSTARTPLUS much faster rate than programming.

Can easily read the contents of the chip program area.

Automatic programming verification.

Comprehensive information prompts, allowing users to understand the working state.

With 40pin ZIF programming of the seat, can be directly programmed in 8-pin to 40 pin PIC microcontroller chip 

can be programmed using ICSP online or add conversion blocks.

8 pin 40 pin-board outside the chip can be downloaded directly online ICSP output.

Compatible with Windows98 and Windows2000/NT, Windows XP / Windows 7 and other operating systems.

Specifications:

Original box: No

Color board: blue

Item size: 90*46*10mm

Net weight: 103g

Package weight: 112g

Package included:

1 x Programmer

1 x High quality USB cable

1 x ICSP cable

2. PX-200 OEM-PICkit2 USB Flash PIC ISP In-System Programmer

PX-200 OEM-PICkit2 USB Flash PIC In-System Programmer . ICSP device (programmer) for PIC microcontroller.

Specification:

- Supports PICs:

PIC10Fxx, PIC12F5xx, PIC16F50x/5x, PIC12F615/ HV615, PIC16F7x/ 7xx, PIC12F62x/63x/67x/68x, PIC16F84x/8xA/8xx/8xxA, PIC16F6xx, PIC16F9xx, PIC18x, 

PIC18xx, PIC18x PIC18F8xxx, PIC18F9xJ6x, PIC18F4xxx, PIC18F2xJxx/4xJxx, PIC24FJ6xGA0xx, PIC24FJ9xGA0xx, PIC24FJ128GA0xx

- Interface: USB

- Does not require additional power supply.

- There are 3 LED indicators for Power, Target, Busy

- Compatible with Windows operating system (98, ME, XP)

3. USB ICSP PIC Programmer

Usb pic programmer is designed to program popular Flash PIC Microcontroller which includes most of the PIC family. Besides 8-bit, it can also program 16-bit and 

32-bit PIC MCU. On board ICSP (In Circuit Serial Programming) connector offers flexible methods to load program. USB port is commonly available and widely used 

on Laptop and Desktop PC, thus is very convenient to use UIC00B. It offers reliable, high speed programming and free windows interface software