Best Raspberry Pi 2 LCD 3.5inch TFT Touchscreen




Raspberry Pi 2 LCD 3.5inch TFT Touchscreen - Support Raspberry Pi 3...!

Package consists of:

1. 3.5inch TFT LCD touchscreen
Specs:
Resolution 320x480 pixels
Touchscreen Controller XPT2046
Type TFT Resistive
LED backlight
LCD interface SPI on GPIO RPi

2. stylus/touchpen

BONUS: Acrylic Transparent case (depend stock). * READY STOCK
Case needs careful installation / additional hole for LCD holder is needed
Package Does not include Raspberry Pi (Pictures are for installation illustration only)

To order e-mail to:
hadisyarief@gmail.com
Whatsapp : +6287774323525

Package/Board Raspberry Pi 4 Model B - 1GB/2GB/4GB/8GB

Package/Board Raspberry Pi 4 Model B - 1GB/2GB/4GB/8GB





Package/Board Raspberry Pi 4 Model B - 1GB/2GB/4GB/8GB
Explanation :
- You can choose board only or board + basic package
- All boards are original from lement14/RS/distributor , Made in the UK
https://www.raspberrypi.com/products/raspberry-pi-4-model-b/
- All power supplies included are original raspberry 5v/3a
- The SD card included in the basic package is class10
How to buy =
1. Board only, its contents:
- Raspberry Pi 4 Model B - according to your choice
2. Basic Kit Package, its contents:
- Raspberry Pi 4 Model B - according to your choice
- Power supply (Original Raspberry) 5v/3a
- SD Card class 10 - 16GB
- Cooling Fan + BlackCase
- Mini HDMI to HDMI 1.5m . cable

To order e-mail to:
hadisyarief@gmail.com
Whatsapp : +6287774323525

Best GPS Antenna GNSS GLONASS Antenna Support Ublox Neo-6M 7M 8M Simcom

GPS Antenna GNSS GLONASS Antenna Support Ublox Neo-6M 7M 8M Simcom- Condition: New,
Weight: 167 Gram, Category: GPS & Sport Tracker, 
GPS Antenna for Arduino GPS Module such as Ublox Neo-6M / Neo-7M / Neo-8M/8N . type
Suitable for other brands such as Simcom
Can be used for motorcycle or car GPS with the same type of antenna
Port type: ipx/ipex connector
cable length: -+ 4cm
antenna size:
front 20*20mm
rear 19*19mm
PCB 23*23mm


To order e-mail to:
hadisyarief@gmail.com
Whatsapp : +6287774323525

Best Broadcast Fm Band Stop Reject Filter 88 -08 Mhz For Receivers Sdr

 

CREATING A DIY 88-108 MHZ FM TRAP - One of the most problematic strong signals you can encounter is regular 88 – 108 MHz broadcast FM stations. They transmit at high power and can cause overloading  and intermodulation problems on simple receivers such as the RTL-SDR. This means that FM stations can prevent you from receiving signals even when you are tuned  far away from the broadcast band.

The simplest solution to reducing strong FM stations is to build an FM trap. This is simply a band stop filter that blocks frequencies between 88 – 108 MHz from  entering your radio. 


A broadcast FM block filter can help if you have very strong broadcasts in your area that are overloading the SDR dongle. 
Also known as “FM Trap”.This Broadcast FM Block Band-Stop Filter can blocks all signals between 88 - 108 MHz. 
Great for use with FOXWEY RTL-SDR or other SDR dongles. Prevents overload due to very strong broadcast FM signals.  

About 50dB attenuation over the stop band, and less than 1dB insertion loss over most pass frequencies.
The filter comes in a 2.8 cm x 2.8 cm x 1.3 cm with two female SMA jack, and there is no aluminum enclosure for this listing. 
Blocks the broadcast FM band between 88 – 108 MHz with over 50dB of attenuation. Designed for RX use only.

Designed for maximum attenuation between 88 - 108 MHz and the 3dB roll off points are at 76 MHz and 122 MHz.
Insertion loss is less than 0.5 dB between 0 – 1 GHz, and mostly less than 1.5 dB between 1 – 3 GHz.
Designed for SDR and radio scanner users. TV installers this is probably not the right product for you. 
TV installers please read the description carefully to avoid disappointment.
Uses SMA female connectors. Comes with a free SMA male to SMA male adapter.
Note:
RX filter only. Designed for SDR users, but might also be useful for TV users struggling with FM interference. 
But TV users please carefully check the spectrum analyzer graphs and 3dB roll off points to ensure that it will not block a TV signal of interest. e.g.

To order e-mail to:
hadisyarief@gmail.com
Whatsapp : +6287774323525

Best DIY "FM TRAP" or 88-108 MHz Band STOP filter

DIY "FM TRAP" or 88-108 MHz Band STOP filterAmong the few "blockers" the most called are the broadcast WFM transmitters. Simple way to solve the problem is to filter the received signals using the "FM TRAP". So called "FM TRAP" is nothing more than a simple Band stop filter for the frequency range of 88-108Mhz. They became really available and so cheap this days that making them at home is more time consuming then money saving. 



Broadcast FM Band Stop Filter 88-108 MHz FM Trap with SMA male to SMA male adapter

Description:
Blocks the broadcast FM band between 88 – 108 MHz with over 50dB of attenuation.
Designed for maximum attenuation between 88 - 108 MHz and the 3dB roll off points are at 76 MHz and 122 MHz.
Insertion loss is less than 0.5 dB between 0 – 1 GHz, and mostly less than 1.5 dB between 1 – 3 GHz.
Uses SMA female connectors. Comes with a free SMA male to SMA male adapter.
A broadcast FM block filter can help if you have very strong broadcasts in your area that are overloading the SDR dongle.
Specification:
Size: 27.5x25.5mm/1.1x1"
Package Includes:
1x Broadcast FM Band Stop Filter
1x SMA male to SMA male adapter
Note:
RX filter only. Designed for SDR users, but might also be useful for TV users struggling with FM interference. 
But TV users please carefully check the spectrum analyzer graphs and 3dB roll off points to ensure that it will not block a TV signal of interest. e.g. 
Channels between 76 - 88 MHz could be attenuated enough to lose reception.



To order e-mail to:
hadisyarief@gmail.com
Whatsapp : +6287774323525