Complete free tutorial antennas design , diy antenna , booster antenna, filter antenna , software antenna , free practical antenna book download !
photo transistor circuit
Free energy Devices Radiant Energy
b) Radiant Energy Patents - Various R. E. Circuits and Devices
1. Patent No. 2,813,242, Nov. 1957 L. R. Crump-Atmospheric Energy Device
This radiant energy conversion art is quite significant since it discloses three distinct conversion applications circuits which are both practical and worthy of further study and improvement.
The accompanying schematics show the three versions, along with the identification of each component within the three circuit diagrams. Of particular interest is the circuit diagram shown in FIG. 3, which is the high voltage D. C. conversion, using input coils, tuning capacitor, a transistor oscillator, transformer and diode circuitry. This arrange- ment should offer the best combination of components to produce a high potential output from a radiant energy source.
The circuit version shown in FIG. 2 is for a general low voltage, wattage arrangement which is simple and may be useful for certain applications. The circuit version shown in FIG. 1 is a direct transistor radio operational design, which is self-explanatory.
There is a general similarity of Cramp's work to that of Lester Hendershot, except for the addition of the antenna and diodes in Crump's art. It should be noted that the tuning capacitor in Crump's circuit is a desirable feature in any Radiant Energy device, since these circuits need to be "tuned" to R.E. frequency. Hendershot's permanent magnet/& clapper component is a desirable dynamic feature which might be used to advantage within the Crump circuitry, but this will require some experimentation before an optimum match is obtained.
The addition of the diodes in Cramp's circuitry increases polarization efficiency, and generally improves the R. E. conversion value of this device. It should be noted that it is believed that Dr. T. H. Moray also used antenna-coupled coils directly connected to his 100 foot long directional antenna, as the Crump input circuitry indicates.
In a general manner, the Cramp circuitry appears to bridge between the art of Moray and Hendershot in the selec- tion and application of the various components, as can be seen from a review of their circuit components.
2. Xtec Corporation, of New Britain, Conn, with reference to Crump's Patent above, (Pats, pending)
This group has developed an antenna/amplifier arrangement which is said to collect and amplify atmospheric/ra- diant energy. The antenna operates as a dependent power supply for the system. An input signal turns on the power amplifying antenna which draws on the potential between two points in the environment to complete a circuit through a form of inductive coupling. The result is amplified energy for the load to be driven.
Simple Diode Radio For Low Impedance Headphones
You can experiment with all the available tapping points to find the best reception. With such a simple radio design, the external aerial will have a big influence.
Best One Transistor Radio
DIY miniature antenna booster
When using a good antenna amplifier for the UHF range, programs can be received from television stations which, without a preamplifier, only deliver a very noisy "snow field". The antenna amplifier described here is very simple. It can because of its small dimensions directly in the junction box of Antenna to be accommodated. The small coupling capacitance in the input protects the transistor from overvoltages that may occur during a thunderstorm. The built-in resonant circuit in the collector branch can be tuned to any frequency between 470 and 790 MHz.
Because of the extremely low retroactive effect of this transistor is the amplifier stronger very stable, even with poor matching of the input and output. The bandwidth of the circuit is about 15 to 40 MHz.
reference : Elektor Electronics